Helping your staff master Revit increasing productivity + firm profits
Revit Accelerator Training
Curated by Architecture Solutions Group
Designed around Revit concepts and architectural workflows that boost productivity.
Bite-sized, searchable modules are to the point and optimized to save you time so you can get back to what matters most- designing.
Our staff training program helps tame the complexities of Revit and becomes an engine of firm productivity.
Why train with us?
Increase Productivity
We believe it is possible to save literal hours of each staff member’s time per week through increased productivity.
The daunting task of training new staff and wading through issues that arise from inexperienced help can become a thing of the past.
Reduce Errors & Liabilities
Revit is a double-edge sword in more ways than one. If one understands how to wield it, they can cut through their work in a fraction of the time. But in the hands of inexperienced staff it can quickly make a mess of things.
Our trainings help staff overcome Revit’s steep learning curve in a fraction of the time, which reduces errors and issues that arise from a lack of understanding.
Built Right to Save You Time
We know from experience how quickly staff time adds up, and we are serious about our commitment to optimizing efficiency wherever possible.
We are taking the time to build our trainings the right way so you don’t pay for it later.
New trainings and resources will continue to be published regularly as they become available.
Cost Benefit Analysis
Every practice is unique, but the value of our resources is universal. We’ve designed our site to ensure that the benefits far exceed the membership fees no matter the size of your practice.
Training Benefits
Productivity Gains = Time Saved x Average Cost Rate x # of Staff Utilizing Revit
We estimate saving anywhere from 1 to 6 hours a week or more per staff member through a better understanding of the software and it’s capabilities. This alone can amount to thousands of dollars in savings per month.
Teaching Expenses = Time Saved x Higher Cost Rate
It takes time for higher value staff to show those less experienced how to do things in Revit. This time saved can amount to thousands more
Error Avoidance = (Time Finding Errors x Higher Cost Rate) + (Time to Fix Errors x Average Cost Rate)
Reduced errors can create an enormous amount of time savings for staff of all levels. Preventing exposure from liabilities caused by undiscovered errors can end up saving far greater costs in both time and expense.
Additional Benefits
Ever growing additional resources
We have published additional helpful resources that add to the value of your membership. As we continue to add more over time it only continues to increase that value.
Monthly ASG Revit Family Giveaway
ASG has an impressive library of complex Revit families that are built to work intuitively for designers while also being ready for advanced documentation. We plan give one of them away each month to all of our current members while providing a highlight of it’s features.
Most of our Revit families consist of $1,000’s in staff hours to develop. Even if some of these families are not directly beneficial to your projects, they contain examples of how to get some pretty cool things to happen in family editing that may be a useful reference in building your own families.
Costs
The cost benefit analysis will be unique to every office but we are doing everything we can to ensure that the savings far outweigh the costs for all of our members. Check out our plans and pricing below
Become a Member
The first step to partnering with ASG is becoming a member. Membership is a monthly or yearly subscription that gives you access to our ever-growing library of training courses and the digital resources available on our website.
Your membership fuels the growth of these resources, so while our content is already worth the cost, it’s value will continue to increase over time.
Selecting a plan submits your application for membership. You will not be charged or receive access until we approve your application.
Once you are an approved member, you can sign in using the Member Login button at the bottom right of our webpage to access your members-only content.
Benefits
-
Our training Library is the culmination of nearly a decade of preparation and content development.
New content will continue to be published regularly as we are able to produce it.
-
While our training library is designed to bring enough value on it’s own, we plan to develop and share a number of architectural resources with our members over time.
These may include things such as:
Design guides with code references
A digital materials library
Members only Revit fam store
Occasional member Revit fam giveaways
We want this to be an ever improving resource that continues to grow in value for our members.
-
ASG has built a wide range of useful Revit Families over the years. We plan to make those available to our members through a members only download store.
-
ASG provides comprehensive Revit Management Services, Personalized Training, and other Consulting Services, but our capacity to take on new clients is limited by our quality-first approach.
This means there may be a waiting list for these additional services but only members may apply.
-
While our resources are designed to optimize architecture offices, we welcome most anyone who feels they would benefit from access to them.
This includes students, other design professionals, educational institutions, and anyone looking to invest in themselves to advance their career in architecture.
-
Welcoming a new member is really about establishing a new relationship for us. We have some work to do making sure you are all set up right and this process helps us manage the flow.
It also helps us manage the tangled web of tax regulations, being sure we are ready to handle things in your jurisdiction.
If your application is not approved it probably boils down to that we either are not set up for handling your location just yet, or we didn’t believe you were real.
You can always reach out and plead your case if your application is rejected.
Founded to Provide Value
We believe in providing real value in all of our services. In fact, seeing the opportunity to do so is why we started our company to begin with.
This means that our services are designed to save you money and put you in a position to be more profitable.
If we aren’t providing that level of value we aren’t interested in being involved.
Jeremy Larsen
Owner + Founder
Having experienced all that goes into establishing, growing, and running an architecture practice, Jeremy founded Architecture Solutions Group to find ways to provide architects with better resources, simplify their practice and allow them to focus on the architecture.
He has over 2 decades of design and documentation experience and has run a variety of businesses over the years, including a fully remote architecture firm with staff and projects throughout the country.
Out of college, he worked for a couple of small boutique offices in Salt Lake City, Utah before moving his family to Portland, Oregon where he gained experience with Bora Architects, a major design firm in town.
After his cherished time at Bora, he spent 7 years as a partner and principal of di’velept design. While there, he reimagined what architecture could be as a fully remote practice. He was responsible for developing their documentation processes and standards, training and managing remote staff, and even went as far as building a comprehensive project management software from the ground up.
Jeremy has been a Project Principal, Manager, Architect, and Designer on many projects throughout his career, including K-12, Office/Warehouse, Self Storage, Multi-Family, Single-Family, Restaurant, Event space, and other Commercial projects.
Passionate about the craft of architecture, he has set out to help architects establish a better way to work that frees up their time and increase profitability.
His architectural expertise goes well beyond building world class documentation systems. He draws on his wealth of industry knowledge to bring you the best resources possible.
Architecture Solutions Group | Owner, Manager
JAN 2025 - Current | Logan, UT
Jeremy has been building world class documentation systems for architecture offices for the better part of a decade and is now focusing his efforts on developing this website as an invaluable resource for architects across the industry.
di’velept design | Partner, Principal & Manager
JAN 2018 - AUG 2024 | Remote
Along with his partner, Jeremy established and grew this firm to 12 staff at it’s peak with projects of various types happening throughout the country including K-12, Office/Warehouse, Multi-Family, Single-Family, Restaurant, Event space, Self Storage, and other Commercial projects.
BORA Architects | Architect III - Design Lead
SEP 2014 - FEB 2018 | Portland, OR
Jeremy started at Bora Architects as an unlicensed architectural intern. Within two and a half years he had obtained licensure and proved himself to be an ARCH III level staff and appointed as a design lead over athletics on a $186 Million large scale high school project. By the end of documentation he was selected to see the entire project through construction.
DD+V | Owner, Manager
SEP. 2014 - JAN. 2018 | Hillsboro, OR
This entity was formed to allow Jeremy to continue his side work in residential design once he moved to Oregon. It was from this entity that he first partnered with Jarod Hall of di’velept design in order to deliver his first commercial architecture project of his own, a 3 story self-storage facility in Vancouver Washington. This would prove to be the beginnings of a great partnership at di’velept.
Work Experience
The Laport Group | Staff
FEB. 2014 - SEP. 2014 | SLC, UT
Jeremy was brought on as part of a team that was hired to modify and clarify the design and documentation of 3 major Multi-Family developments that suffered from major design problems during construction from the previously hired design team.
This became an education in just how serious problems can become when proper care is not taken in design and was a chance to really stretch his problem solving abilities.
Diamond Phillips | Staff
OCT. 2013 - FEB. 2014 | SLC, UT
Even as a young staff member straight out of school Jeremy helped this office put into place some Revit management strategies and efforts to help streamline design and documentation efforts. This would prove to be a common thread in all of his work sense.
Just Fold | Partner
SUMMER 2013 | SLC, UT Granary Row
This was a little shop featuring foldable transportation options like bikes and scooters that was run out of a shipping container project in downtown Salt Lake City. Jeremy and a couple of architecture friends took this on as a summer break endeavor and it would be his first lesson in running a business with partners.
Envision DS | Owner, Manager
MAR. 2007 - SEP. 2014 | LOGAN, BOUNTIFUL, MIDVALE, UT
Envision was started as a videography service while Jeremy was in high school. It was then transitioned to a residential home design and drafting company after acquiring skills through drafting classes and training at a technical college.
University of Utah | M Arch
AUG. 2011 - MAY 2013
Final Studio - Top Honor Award for Architectural Design Excellence
AlphaRhoChi - Medal for outstanding leadership and service in architecture
Phi Eta Sigma - Honor Society
University of Utah | BS Architectural Studies
AUG. 2008 - MAY 2011
Utah State University | General Studies
JAN 2007 - MAY 2008